Batteries & storageSungrow
SBH100
Sungrow SBH100 is a 10kWh high-voltage LFP home battery built from two 5kWh modules, with 50A continuous charge/discharge capability and IP55 protection.
Equipment research
Research the exact equipment before you buy it.
Search panels, batteries, inverters and portable power equipment by model and use case. Compare specifications, open product details and continue into calculators, support and local installation help.
Model-specific research
Use specifications, source links and compatibility context to narrow the equipment that fits your system.
Browse by category
Compare each component using the specifications that actually matter.
Solar panels, batteries, inverters and portable power stations solve different jobs, so Melnti shows the measurements and compatibility details that matter for each equipment type.
Roof output, electrical fit & dimensions
Solar panels
Wattage, Voc/Vmp, current, efficiency, dimensions, temperature behavior and warranty.
Browse products →
Usable energy, current & compatibility
Batteries
Usable kWh, continuous current, cycle-life conditions, BMS communication and warranty.
Browse products →
Architecture, MPPT & backup behavior
Inverters
Hybrid, grid-tied and off-grid roles, PV windows, battery support, output and surge.
Browse products →
Integrated backup & mobile power
Portable power stations
Capacity, inverter output, solar input, UPS behavior, portability and expansion.
Browse products →
Compatibility, controls & expansion
Parts & components
Browse parts and controls by brand, component type and documented compatibility evidence.
Browse components →Browse equipment
Find equipment by model, brand or type.
Browse Melnti's equipment research, compare models and open product, parts, calculator and installer paths from one place.
Results matching your filters.
Batteries & storageSungrow
SBH150
Sungrow SBH150 is a 15kWh high-voltage LFP battery built from three 5kWh modules, with 211.2V nominal voltage and 50A continuous charge/discharge capability.
InvertersSungrow
SH10T
Sungrow SH10T is a 10kW three-phase hybrid inverter with two MPPTs, up to 20kWp PV input, a 100–700V battery range and 50A charge/discharge capability.
From equipment to a complete plan
Use one product search to keep moving.
Compare alternatives, estimate the system size, check documentation and compatibility, and find local installation help without restarting your research on every page.
ComparePut similar models side by side
CalculateEstimate battery, inverter and solar ranges
VerifyCheck official specifications and documentation
Local helpContinue into installers and quote requests
Start with the job, then narrow the equipment
Solar equipment is easiest to compare after the job is defined. A 10 kWh battery may be perfectly adequate for one household and a poor choice for another because battery energy and battery power answer different questions. The same is true of inverters: headline kilowatts do not tell you everything about surge capability, PV input limits, backup behavior or battery compatibility.
1Define the load
2Decide backup goals
3Check electrical compatibility
4Compare total ownership
What belongs in a useful product page
As the Melnti product library grows, individual product pages are designed to separate manufacturer claims from decision-useful facts: usable energy, continuous and peak output, input limits, efficiency assumptions, communication protocols, warranty conditions, dimensions, environmental limits and documented compatibility.
Research paths
- Solar panels — module efficiency, power, temperature behavior, dimensions, warranty and roof fit.
- Solar batteries — usable capacity, power, cycle-life claims, warranty throughput and BMS compatibility.
- Solar inverters — hybrid, grid-tied and off-grid architectures, MPPT windows, battery support and backup output.
- Backup power — whole-system planning for outages and critical loads.
- Solar generators — portable power stations and foldable-panel systems.
- Complete systems — how the components work together.