Manufacturer-approvedCharge controllersRenogy
Adventurer Li 30A PWM
Renogy Adventurer Li 30A PWM is a flush-mount 30A solar charge controller for 12V/24V systems with LCD monitoring, lithium support and a 50V maximum PV input.
Parts & compatibility
Start with the exact product before choosing a component.
Use model numbers, voltage/current limits, connectors, communications and manufacturer documentation to narrow compatible parts. Use the documented compatibility evidence shown with a part before buying it for a specific system.
Compatibility first
Model number, voltage/current, connector, firmware and communications matter more than appearance.
Compatibility by component family
Start with the component family, then verify the exact product pairing.
Use each family as a route into model-specific compatibility evidence. Empty or uncertain pairings are not padded with unrelated products.
Compatibility options
Monitoring & communications
Meters, CTs, shunts, gateways, dongles, CAN and RS485 equipment.
Check compatibility →Compatibility options
Charge & control
MPPT controllers, system controllers and energy-management hardware.
Check compatibility →Compatibility options
Expansion & backup
Expansion batteries, transfer equipment and critical-load hardware.
Check compatibility →Search parts & controls
Search by part, brand or component type.
Filter by brand and type, then check the compatibility basis on each result before buying. If evidence is missing, Melnti does not substitute an unrelated product.
Parts and accessories matching your filters. Check the compatibility basis on each result.
Manufacturer-approvedCharge controllersRenogy
Voyager 20A PWM Waterproof
Renogy New Edition Voyager 20A is an IP67 waterproof PWM solar charge controller for 12V/24V systems with LCD monitoring and support for lead-acid and lithium profiles.
Manufacturer-approvedCharge controllersRenogy
Wanderer Li 30A PWM
Renogy Wanderer Li 30A PWM Charge Controller is a 12V, 30A controller with a 25V maximum PV input, low self-consumption and optional BT-1 monitoring.
Manufacturer-approvedParts & accessoriesVictron Energy
Cerbo GX
Victron Cerbo GX is a system communication and monitoring centre with three VE.Direct ports, VE.Bus, VE.Can/BMS-Can, Wi-Fi and Bluetooth for supported Victron and documented third-party integrations.
Manufacturer-approvedParts & accessoriesBLUETTI
Epanel Smart Distribution Panel
BLUETTI Epanel is a smart AC/DC distribution panel with 8 protected AC circuits and 20 protected DC circuits, app monitoring and up to 50A AC / 100A DC…
Local help
Need a component installed, sourced or checked near you?
Search the installer directory by city or town. Melnti shows direct service-area evidence first, then wider regional/country options without presenting them as locally based.
Compatibility labels
“Looks compatible” is not a compatibility standard.
- OEM / original when the manufacturer documents the part
- Manufacturer-approved when an official compatibility source exists
- Documented compatible when reliable technical documentation supports the pairing
- Universal only for genuinely standardized components within their ratings
Find the component, not just the category
Solar systems depend on more than panels, batteries and inverters. Melnti groups source-backed expansion batteries, charge controllers, optimizers, microinverters, monitoring hardware, meters, communications equipment, backup accessories and related components so people can search by brand and equipment family.
Compatibility comes before appearance
Two connectors or accessories can look similar and still be electrically or digitally incompatible. Melnti treats OEM, manufacturer-approved, documented-compatible and generic/universal components as different evidence levels. Confirm model numbers, voltage/current limits, communications, firmware and regional documentation before installation.