Manufacturer-approvedBatteries & storageBLUETTI
B210 Expansion Battery
BLUETTI B210 is a 2,150Wh LiFePO4 expansion battery with IP65 protection and standalone USB-C, USB-A and 12V DC outputs.
Parts & compatibility
Start with the exact product before choosing a component.
Use model numbers, voltage/current limits, connectors, communications and manufacturer documentation to narrow compatible parts. Use the documented compatibility evidence shown with a part before buying it for a specific system.
Compatibility first
Model number, voltage/current, connector, firmware and communications matter more than appearance.
Compatibility by component family
Start with the component family, then verify the exact product pairing.
Use each family as a route into model-specific compatibility evidence. Empty or uncertain pairings are not padded with unrelated products.
Compatibility options
Monitoring & communications
Meters, CTs, shunts, gateways, dongles, CAN and RS485 equipment.
Check compatibility →Compatibility options
Charge & control
MPPT controllers, system controllers and energy-management hardware.
Check compatibility →Compatibility options
Expansion & backup
Expansion batteries, transfer equipment and critical-load hardware.
Check compatibility →Search parts & controls
Search by part, brand or component type.
Filter by brand and type, then check the compatibility basis on each result before buying. If evidence is missing, Melnti does not substitute an unrelated product.
Parts and accessories matching your filters. Check the compatibility basis on each result.
Manufacturer-approvedBatteries & storageBLUETTI
B230 Expansion Battery
BLUETTI B230 is a 2,048Wh LiFePO4 expansion battery with standalone USB-C, USB-A and regulated 12V outputs.
Manufacturer-approvedBatteries & storageBLUETTI
B300 Expansion Battery
BLUETTI B300 is a 3,072Wh LiFePO4 expansion battery with a built-in 200W MPPT input and standalone DC outputs.
Manufacturer-approvedBatteries & storageBLUETTI
B300K Expansion Battery
BLUETTI B300K is a 2,764.8Wh automotive-grade LiFePO4 expansion battery designed for several current BLUETTI power-station platforms.
Manufacturer-approvedBatteries & storageBLUETTI
B300S Expansion Battery
BLUETTI B300S is a 3,072Wh LiFePO4 expansion battery with temperature-adaptive charging support for the AC500 platform.
Manufacturer-approvedBatteries & storageBLUETTI
B80 Expansion Battery
BLUETTI B80 is an 806Wh LiFePO4 expansion battery for AC60 that can also operate as a standalone DC power source.
Manufacturer-approvedBatteries & storageJackery
Battery Pack 1000 Plus
Jackery Battery Pack 1000 Plus is a 1,264.64Wh LiFePO4 expansion battery made specifically for Explorer 1000 Plus.
Manufacturer-approvedBatteries & storageJackery
Battery Pack 2000 Plus
Jackery Battery Pack 2000 Plus is a 2,042.8Wh LiFePO4 expansion battery designed for Explorer 2000 Plus.
Manufacturer-approvedBatteries & storageJackery
Battery Pack 2000 Plus v2
Jackery Battery Pack 2000 Plus v2 is a 2,048Wh LiFePO4 expansion battery designed specifically to extend compatible HomePower 2000 Plus v2 systems.
Manufacturer-approvedBatteries & storageJackery
Battery Pack 3600 Plus
Jackery Battery Pack 3600 Plus is a 3,584Wh LiFePO4 expansion battery for HomePower 3600 Plus and HomePower 3600 Pro Max.
Manufacturer-approvedBatteries & storageJackery
Battery Pack 5000 Plus
Jackery Battery Pack 5000 Plus is a 5,040Wh LiFePO4 expansion battery made exclusively for Explorer 5000 Plus.
Manufacturer-approvedCharge controllersRenogy
Adventurer Li 30A PWM
Renogy Adventurer Li 30A PWM is a flush-mount 30A solar charge controller for 12V/24V systems with LCD monitoring, lithium support and a 50V maximum PV input.
Manufacturer-approvedCharge controllersRenogy
REGO 30A MPPT
Renogy REGO 30A MPPT Solar Charge Controller supports 12V, 24V, 36V and 48V battery systems, 150V maximum PV input and more than 99% MPPT tracking efficiency.
Manufacturer-approvedCharge controllersRenogy
Rover 100 Amp MPPT Solar Charge Controller
Renogy Rover 100 Amp MPPT Solar Charge Controller is the large Rover model for 12V–48V systems, rated at 100A and supporting up to 5,200W of PV input on…
Manufacturer-approvedCharge controllersRenogy
Rover 60 Amp MPPT Solar Charge Controller
Renogy Rover 60 Amp MPPT Solar Charge Controller supports 12V, 24V, 36V and 48V battery systems, with 60A charge current and up to 3,200W PV input on a…
Manufacturer-approvedCharge controllersRenogy
Rover Boost 10A MPPT
Renogy Rover Boost 10A MPPT is designed to boost lower-voltage solar input for charging 36V or 48V battery banks, with 10A rated charge current.
Manufacturer-approvedCharge controllersRenogy
Rover Li 20 Amp MPPT Solar Charge Controller
Renogy Rover Li 20 Amp MPPT Solar Charge Controller is a 20A 12/24V controller with up to 95V PV input and 260W/520W solar input limits for 12V/24V battery…
Manufacturer-approvedCharge controllersRenogy
Rover Li 30 Amp MPPT Solar Charge Controller
Renogy Rover Li 30 Amp MPPT Solar Charge Controller is a 30A 12/24V controller with up to 100V PV input and array limits of 400W at 12V or…
Manufacturer-approvedCharge controllersRenogy
Rover Li 40 Amp MPPT Solar Charge Controller
Renogy Rover Li 40 Amp MPPT Solar Charge Controller is a 40A 12/24V controller with a 15–100V PV input range and maximum array power of 520W at 12V…
Manufacturer-approvedCharge controllersRenogy
Rover Lite 60A MPPT
Renogy Rover Lite 60A MPPT Solar Charge Controller supports 12V to 48V battery systems, 150V maximum solar input and up to 3,200W PV on a 48V battery system.
Manufacturer-approvedCharge controllersRenogy
Voyager 20A PWM Waterproof
Renogy New Edition Voyager 20A is an IP67 waterproof PWM solar charge controller for 12V/24V systems with LCD monitoring and support for lead-acid and lithium profiles.
Manufacturer-approvedCharge controllersRenogy
Wanderer 10A PWM Charge Controller
Renogy Wanderer 10A PWM Charge Controller is a compact 10A controller for 12V/24V systems, with a 50VDC maximum PV input and array limits of 130W at 12V or…
Manufacturer-approvedCharge controllersRenogy
Wanderer Li 30A PWM
Renogy Wanderer Li 30A PWM Charge Controller is a 12V, 30A controller with a 25V maximum PV input, low self-consumption and optional BT-1 monitoring.
Manufacturer-approvedParts & accessoriesSolarEdge
Home Backup Interface
SolarEdge Home Backup Interface is the grid-isolation and metering component used with supported SolarEdge residential inverter/battery systems to enable full or partial home backup during grid interruptions.
Manufacturer-approvedParts & accessoriesVictron Energy
Cerbo GX
Victron Cerbo GX is a system communication and monitoring centre with three VE.Direct ports, VE.Bus, VE.Can/BMS-Can, Wi-Fi and Bluetooth for supported Victron and documented third-party integrations.
Manufacturer-approvedCharge controllersVictron Energy
SmartSolar MPPT RS 450/100
Victron SmartSolar MPPT RS 450/100 is an isolated 48V solar charge controller for high-voltage PV arrays, supporting up to 100A charging and a 65–450V PV operating range.
Manufacturer-approvedCharge controllersVictron Energy
SmartSolar MPPT RS 450/200
Victron SmartSolar MPPT RS 450/200 is a 48V-class solar charge controller with four independent MPP trackers, 450V maximum PV input and up to 200A battery charge current.
Manufacturer-approvedParts & accessoriesBLUETTI
Charger 1 Alternator Charger
BLUETTI Charger 1 is a 560W alternator charger designed to recharge portable power stations from a vehicle electrical system with app-adjustable output voltage.
Manufacturer-approvedParts & accessoriesBLUETTI
Charger 2 Alternator & Solar Dual DC Charger
BLUETTI Charger 2 is a 1,200W dual-source DC charging hub that can combine vehicle-alternator and solar input for compatible portable power systems.
Manufacturer-approvedParts & accessoriesBLUETTI
D40 DC-DC Battery Charger
BLUETTI D40 is a 400W DC-DC charger for 12V RV or marine house batteries, supporting LiFePO4, AGM/Gel, lead-acid and calcium battery types.
Manufacturer-approvedBatteries & storageBLUETTI
B500K Expansion Battery
BLUETTI B500K is a 5,120Wh LiFePO4 expansion battery for current BLUETTI home-backup and portable-power platforms, with more than 4,000 rated cycles.
Manufacturer-approvedBatteries & storageBLUETTI
BlueCell 200 Expansion Battery
BLUETTI BlueCell 200 is a 2,016Wh LiFePO4 expansion battery built specifically to extend the runtime of the BLUETTI FridgePower backup system.
Manufacturer-approvedCharge controllersBLUETTI
SolarX 4K Solar Charge Controller + P090D Adapter Cable
BLUETTI SolarX 4K is a 4,000W MPPT solar charge controller that accepts 150–500V PV input and steps it down below 60V for compatible BLUETTI systems.
Manufacturer-approvedParts & accessoriesBLUETTI
Epad Central Control Screen
BLUETTI Epad is an IP20 central touchscreen for RV and mobile energy systems, combining BLUETTI control with CAN, Ethernet, Wi-Fi and Bluetooth connectivity.
Manufacturer-approvedParts & accessoriesBLUETTI
Epanel Smart Distribution Panel
BLUETTI Epanel is a smart AC/DC distribution panel with 8 protected AC circuits and 20 protected DC circuits, app monitoring and up to 50A AC / 100A DC…
Manufacturer-approvedParts & accessoriesBLUETTI
X20 Laptop Power Bank
BLUETTI X20 is a 153.6Wh LiFePO4 laptop power bank with up to 160W dedicated DC output, 100W USB-C input/output and adapters for a wide range of laptops.
Manufacturer-approvedParts & accessoriesBLUETTI
RV5 Power Hub
BLUETTI RV5 Power Hub is a 5,000W all-in-one RV energy hub combining inverter, charging, solar/alternator integration and DC power functions in one platform.
Local help
Need a component installed, sourced or checked near you?
Search the installer directory by city or town. Melnti shows direct service-area evidence first, then wider regional/country options without presenting them as locally based.
Compatibility labels
“Looks compatible” is not a compatibility standard.
- OEM / original when the manufacturer documents the part
- Manufacturer-approved when an official compatibility source exists
- Documented compatible when reliable technical documentation supports the pairing
- Universal only for genuinely standardized components within their ratings
Find the component, not just the category
Solar systems depend on more than panels, batteries and inverters. Melnti groups source-backed expansion batteries, charge controllers, optimizers, microinverters, monitoring hardware, meters, communications equipment, backup accessories and related components so people can search by brand and equipment family.
Compatibility comes before appearance
Two connectors or accessories can look similar and still be electrically or digitally incompatible. Melnti treats OEM, manufacturer-approved, documented-compatible and generic/universal components as different evidence levels. Confirm model numbers, voltage/current limits, communications, firmware and regional documentation before installation.