Batteries & storage

SMA Home Storage

Name: SMA SMA Home Storage
Brand: SMA

SMA

SMA Home Storage is a modular LFP home battery built from 3.28kWh modules, scaling to 16.4kWh, with IP65 protection and integration with current SMA Sunny Boy Smart Energy and Sunny Tripower Smart Energy hybrid inverters.

View official product ↗Compare

Model details

Key information for this model.

Use the verified specifications below as a research starting point, then confirm the exact regional version on the manufacturer page before buying.

Usable energy per module3.28 kWh

Supported family capacity3.28–16.40 kWh

Cell chemistryLithium iron phosphate (LFP)

Protection classIP65

Approximate cycle coverage8,000 full charge/discharge cycles equivalent under SMA warranty throughput terms

Compatible inverter familiesSunny Boy Smart Energy; Sunny Tripower Smart Energy

Outdoor installationSupported within manufacturer temperature and installation limits

Best for

Where it fits.

SMA solar-plus-storage systems that need modular high-voltage battery capacity, outdoor-capable IP65 hardware and manufacturer-documented integration with compatible SMA hybrid inverters.

Watch for

Limits to check.

Module count and supported capacity depend on the paired inverter. SMA states one to four modules with Sunny Boy Smart Energy and two to five with Sunny Tripower Smart Energy; required firmware and regional availability must be checked before ordering.

Warranty

Coverage note.

SMA states a two-year factory warranty plus an additional eight years when the product is registered within 30 days of commissioning, for a total of 10 years under the applicable warranty conditions.

Next checks

Useful next steps for this model.

Move from model research into comparison, load planning and local installation help without starting again.

Official product information

Confirm the current regional model, specifications, included accessories and availability with the manufacturer.

View official product →

Compare alternatives

Put this model beside nearby options and compare capacity, power, charging, compatibility and other relevant differences.

Add to comparison →

Estimate the storage you need.

Use the most relevant Melnti calculator to connect the product specification to the load or system requirement.

Estimate battery runtime →

Local help

For installed equipment, search service coverage by city or town and request a project connection through Melnti.

Find installers →

Source & buying note

Confirm the exact regional model before buying.

Manufacturer pages, regional SKUs and specifications can change. Use the source links below to confirm the exact model and local version before placing an order.

Information checked: 2026-09-01

Market note: Europe / verify current country availability and inverter firmware before purchase

Official product: Open manufacturer page ↗