Portable power

Elite 30 V2 Portable Power Station

Name: BLUETTI Elite 30 V2 Portable Power Station
Brand: BLUETTI

BLUETTI

BLUETTI Elite 30 V2 is a compact 288Wh LiFePO4 portable power station with 600W continuous output, up to 1,500W lifting power and a fast UPS mode.

View official product ↗Compare

Model details

Key information for this model.

Use the verified specifications below as a research starting point, then confirm the exact regional version on the manufacturer page before buying.

Capacity288Wh

Battery chemistryLiFePO4

AC output600W continuous

Lifting powerUp to 1,500W for supported resistive loads

UPS transfer≤10ms

Solar inputUp to 200W

USB-CUp to 140W PD

Cycle life3,000+ cycles

WeightApprox. 4.3kg

Best for

Where it fits.

Light camping, travel, laptops, communications gear and short-duration backup for small household electronics where low weight and fast recharge matter.

Watch for

Limits to check.

At 288Wh, Elite 30 V2 is intended for smaller loads and short runtimes. BLUETTI states it does not support normal battery expansion; high-demand or long-duration backup needs a larger system.

Compatibility

System fit.

BLUETTI documents AC, solar, vehicle and Charger 1 charging. The unit does not support ordinary expansion-battery operation; use only documented charging interfaces and limits.

Warranty

Coverage note.

BLUETTI lists a 5-year warranty for the current Elite 30 V2; regional warranty terms apply.

Next checks

Useful next steps for this model.

Move from model research into comparison, load planning and local installation help without starting again.

Official product information

Confirm the current regional model, specifications, included accessories and availability with the manufacturer.

View official product →

Compare alternatives

Put this model beside nearby options and compare capacity, power, charging, compatibility and other relevant differences.

Add to comparison →

Check what you need to power.

Use the most relevant Melnti calculator to connect the product specification to the load or system requirement.

Check appliance loads →

Local help

For installed equipment, search service coverage by city or town and request a project connection through Melnti.

Find installers →

Related BLUETTI equipment

More models in this equipment family.

Compare nearby models before deciding which specification level actually fits the job.

Portable powerBLUETTI

BLUETTI AC200L

A 2,048Wh LiFePO4 portable power station with 2,400W AC output, up to 1,200W solar input and battery expansion in BLUETTI’s ecosystem. It is suited to medium-duty backup and…

View product Compare →

Portable powerBLUETTI

AC180

BLUETTI AC180 is a 1,152Wh portable power station with 1,800W AC output, up to 1,440W AC charging and up to 500W solar input.

View product Compare →Official page ↗

Portable powerBLUETTI

AC180P

BLUETTI AC180P pairs a 1,440Wh LiFePO4 battery with 1,800W AC output, up to 1,440W AC input and up to 500W solar input.

View product Compare →Official page ↗

Portable powerBLUETTI

AC200MAX

BLUETTI AC200MAX is a 2,048Wh expandable portable power station with 2,200W AC output, up to 900W solar input and BLUETTI battery expansion support.

View product Compare →Official page ↗

Portable powerBLUETTI

AC200P L

BLUETTI AC200P L is a 2,304Wh LiFePO4 portable power station with 2,400W AC output, 3,600W surge and up to 1,200W solar input.

View product Compare →Official page ↗

Portable powerBLUETTI

AC50B

BLUETTI AC50B is a compact 448Wh LiFePO4 portable power station with 700W continuous AC output, 1,000W lifting mode and 200W solar input.

View product Compare →Official page ↗

Source & buying note

Confirm the exact regional model before buying.

Manufacturer pages, regional SKUs and specifications can change. Use the source links below to confirm the exact model and local version before placing an order.

Information checked: 2026-09-03

Market note: United States / regional offers mapped separately

Official product: Open manufacturer page ↗